HYDAC賀德克流量傳感器EVS 3110 HYDAC賀德克流量傳感器EVS 3110 中文描述
可用的版本：標準;與恒指傳感器檢測
在EVS -3110系列（不銹鋼系列）的流量變送器是專門為構思利用液壓等流體技術工廠。它們操作根據渦輪原理，這意味著，一個葉輪的旋轉在介質的流動的旋轉速度被記錄并轉換成4?20 mA模擬信號。對于此的EVS 3110不銹鋼系列通常配備有葉輪的硬金屬軸承，也可以在脈動時，動態媒體流由于所得的增強魯棒性。兩個額外的G1 / 4螺紋孔中的渦輪機殼體的孔提供的流量變送器，附加連接選項，例如對溫度和壓力傳感器。
耐壓力高達400巴（根據版本）
從1 ... 100厘斯粘度
輸出信號4 ... 20 mA的
溫度和/或壓力傳感器可以連接其他
HYDAC賀德克流量傳感器EVS 3110 英文描述
Available versions:
Standard; with HSI sensor detection The flow rate transmitters of the EVS-3110 series (stainless steel series) are specially conceived for utilisation in hydraulic and other fluid technology plants. They operate in accordance with the turbine principle, which means that the rpm of an impeller wheel rotating in the flow of the media is recorded and converted into a 4 ... 20 mA analogue signal. For this the EVS 3110 stainless steel series is generally equipped with a hard metal bearing of the impeller wheel and can also be used in pulsating, dynamic media flows thanks to the resulting enhanced robustness. Two additional G1/4 threaded bore holes in the turbine housing provide the flow rate transmitter with additional connection options, e.g. for temperature and pressure sensors.
The flow rate transmitters of the EVS 3110-H series with HSI sensor detection were specially developed for use in conjunction with the HYDAC measurement devices HMG 500, HMG 510, HMG 3000 and CMU 1000. For data transmission purposes, the EVS 3110-H devices are equipped with an HSI interface (HYDAC Sensor Interface). Thanks to this, the HSI sensors are recognised compley automatically by the HYDAC measurement devices listed above and all necessary basic device settings are then immediay undertaken automatically.
Pressure-resistant up to 400 bar (depending on the version)
Viscosities from 1 ... 100 cSt
Output signal 4 ... 20 mA
Additional connection of temperature and/or pressure sensors possible
流量測量變換器
流量測量的EVS 3000系列的換能器的工作原理根據渦輪原理（記錄一個葉輪旋轉，在媒體流的轉） 。
|
